A Skutt 240V electric kiln runs on standard residential high-voltage power, reaches cone 10 (around 2,350°F), and fires evenly from top to bottom. It suits serious potters who want reliable, repeatable results without commercial three-phase wiring. Most models pair with the KilnMaster or GlassMaster digital controller for precise, programmable firings. You know what a good […]
A fuel-burning kiln is the best choice for reduction firing. Gas kilns—running on natural gas or propane—give potters the most reliable control over atmosphere and are the standard for studio reduction work. Wood-fired kilns deliver unmatched surface character but demand far more labor. Electric kilns can simulate reduction, but only with added equipment and real […]
Quick answer: A professional pottery wheel is built for daily use, with a powerful motor (½ to 1+ HP), a high centering capacity (100+ lbs), and a durable construction that withstands years of studio work. The best choice depends on your throwing style, space, and budget. Brands like Shimpo, Brent, and Skutt lead the market […]
Quick answer: An electric kiln is the most practical option for home pottery studios because it’s clean, easy to control, and runs on standard household power. Before buying, check your space, electrical setup (most need 240V), and the kiln’s temperature range. Trusted brands like Skutt, Paragon, and L&L offer reliable models for beginners and pros […]
So you’ve caught the pottery bug and you’re ready to set up a space at home. Good news: you don’t need a warehouse or a fortune to get started. You just need to think through a few things before you buy anything.Start With Space, Not EquipmentBefore shopping for a wheel or kiln, look at the […]
If you’ve spent any time browsing glaze shelves, you’ve run into AMACO. They’re one of the most established names in ceramics, and for good reason — their lineup covers everything from classroom-safe low-fire glosses to richly textured Cone 5-6 art glazes. With hundreds of colors spread across dozens of series, though, picking the right one […]
So you’ve caught the pottery bug and you’re ready to set up a space at home. Good news: you don’t need a warehouse or a fortune to get started. You just need to think through a few things before you buy anything.Start With Space, Not EquipmentBefore shopping for a wheel or kiln, look at the […]
Choosing a kiln for a home studio is always a balancing act you want real capacity without something that overwhelms your space, power that can hit cone 6 reliably without a learning curve that scares you off firing for months. The Skutt 1027 hits that balance about as well as any kiln on the market, […]
For potters curious about 3D printing, one question comes up almost immediately: does it actually print clay, or just some watered-down slip through an air compressor? With the 3D PotterBot 10 Pro, now available at The Kiln Shop, the answer is the real thing — full-body clay, extruded directly, the same material you’d throw on […]
If you’ve ever extruded a beautiful ribbon of clay from your pugmill, only to watch the edges start ripping and shredding a few feet in, you’re not alone. This is one of the most common pugmill complaints among potters especially for anyone new to working with a high-volume clay mixer for the first time.A recent […]